Plum blossom pipe is a kind of plum blossom communication pipe formed by PE particles as the main material plus other formulas through a unique mold, also known as plum blossom pipe and honeycomb pipe, this kind of pipe has a smooth inner wall and can be used to wear fiber optic cables directly, which saves man-hours, and its structure is reasonable, with high use value and long service life. It is mainly used for mobile, Tietong, Unicom, Netcom, radio and television communication cable sheath tube.
Folding Editorial Plum Blossom Pipe Characteristics
Plum blossom pipe adopts porous one-piece structure, good rigidity and uniform force. The inner wall of the product has a small friction coefficient, so it is light and fast to put on the cable, and the construction is simple and easy. With multiple holes, can reserve pipe holes, improve the utilization rate of communication holes. The product is applicable to a wide range of temperatures (+80-40), can be used in tropical and cold regions. The connector adopts socket structure. No tools are needed to complete the connection between the tubes, which is convenient for construction and maintenance. The service life of plum pipe is more than 30 years under the condition of buried depth. Performance indicators The color of the pipe is even and consistent, the color is white, according to the requirements of users, other colors can also be customized. The pipe is smooth and even, with uniform color, no deformation, distortion and other defects are allowed. The inner and outer pipe walls are not allowed to have cracks and breakage, perforation. The marking should be durable and easy to recognize.
Scope of use
1. The buried trench of the pipe should be as straight as possible according to the design requirements and construction operations, such as the bottom of the trench is not flat can be paved with a layer of fine sand. Before burying the pipe, the hard material in the trench should be removed to prevent deformation of the pipe. When starting to bury the pipe, the porous pipe should be reserved 10-15CM in the manhole for threading the cable. The pipe should be plugged to cover the sub-pipe exposed at the manhole end. When burying the pipe, it is strictly forbidden to mix sediment and foreign matter into the pipe.
2. Pipe connection will be placed in the pipe shape positioning rib upward, the end of the pipe outer wall clean, and then direct one end of the socket insertion, and then the end of the surface of the pad on a thick board, with a hammer head tapping board, so that the pipe socket in place. At the other end of the direct socket, another pipe is inserted into the direct socket and socketed into place, and so on down to the next manhole. In actual construction, the length of each pipe is not necessarily the same as the length of the manhole, in this case, according to the actual length of the manhole, the distance between the length of the pipe measured, and sawed with a hacksaw, be sure to saw flat and neat. After the docking is completed, the end that extends into the manhole is required to be plugged with a pipe plug to prevent the intrusion of foreign objects.
3. The first time you install this product, you can lay the first section (the distance between the two manholes) without backfilling. Use the cable threader to try to penetrate a hole or two holes, smooth penetration, and then to the next section of the pavement, so it will be more assured.
4. After the pipe is laid, it should be backfilled with fine sand or fine soil to the height of the encroaching pipe first, not to make the pipe suspended state, and then backfilled with other soil, forbidding the big stones, big dry soil pieces to the pipe.
5. When the pipe passes through the section which is seriously damaged by external force, the part of the joint hole is covered with cement mixture to ensure its absolute safety.

The company produces various PVC power pipes and fittings. Since its establishment, it has successively passed ISO9001 quality management system certification and ISO14001 environmental management system certification. 

Plum blossom pipe is a kind of plum blossom communication pipe formed by PE particles as the main material plus other formulas through a unique mold, also known as plum blossom pipe and honeycomb pipe, this kind of pipe has a smooth inner wall and can be used to wear fiber optic cables directly, which saves man-hours, and its structure is reasonable, with high use value and long service life. It is mainly used for mobile, Tietong, Unicom, Netcom, radio and television communication cable sheath tube.
Folding Editorial Plum Blossom Pipe Characteristics
Plum blossom pipe adopts porous one-piece structure, good rigidity and uniform force. The inner wall of the product has a small friction coefficient, so it is light and fast to put on the cable, and the construction is simple and easy. With multiple holes, can reserve pipe holes, improve the utilization rate of communication holes. The product is applicable to a wide range of temperatures (+80-40), can be used in tropical and cold regions. The connector adopts socket structure. No tools are needed to complete the connection between the tubes, which is convenient for construction and maintenance. The service life of plum pipe is more than 30 years under the condition of buried depth. Performance indicators The color of the pipe is even and consistent, the color is white, according to the requirements of users, other colors can also be customized. The pipe is smooth and even, with uniform color, no deformation, distortion and other defects are allowed. The inner and outer pipe walls are not allowed to have cracks and breakage, perforation. The marking should be durable and easy to recognize.
Scope of use
1. The buried trench of the pipe should be as straight as possible according to the design requirements and construction operations, such as the bottom of the trench is not flat can be paved with a layer of fine sand. Before burying the pipe, the hard material in the trench should be removed to prevent deformation of the pipe. When starting to bury the pipe, the porous pipe should be reserved 10-15CM in the manhole for threading the cable. The pipe should be plugged to cover the sub-pipe exposed at the manhole end. When burying the pipe, it is strictly forbidden to mix sediment and foreign matter into the pipe.
2. Pipe connection will be placed in the pipe shape positioning rib upward, the end of the pipe outer wall clean, and then direct one end of the socket insertion, and then the end of the surface of the pad on a thick board, with a hammer head tapping board, so that the pipe socket in place. At the other end of the direct socket, another pipe is inserted into the direct socket and socketed into place, and so on down to the next manhole. In actual construction, the length of each pipe is not necessarily the same as the length of the manhole, in this case, according to the actual length of the manhole, the distance between the length of the pipe measured, and sawed with a hacksaw, be sure to saw flat and neat. After the docking is completed, the end that extends into the manhole is required to be plugged with a pipe plug to prevent the intrusion of foreign objects.
3. The first time you install this product, you can lay the first section (the distance between the two manholes) without backfilling. Use the cable threader to try to penetrate a hole or two holes, smooth penetration, and then to the next section of the pavement, so it will be more assured.
4. After the pipe is laid, it should be backfilled with fine sand or fine soil to the height of the encroaching pipe first, not to make the pipe suspended state, and then backfilled with other soil, forbidding the big stones, big dry soil pieces to the pipe.
5. When the pipe passes through the section which is seriously damaged by external force, the part of the joint hole is covered with cement mixture to ensure its absolute safety.